Face coverings at the MPF, CAC/DEERS, ID cards, Commissary, BX and Shopette are mandatory!  All Civilian, Active Duty members and dependents are reminded to avoid visiting the Commissary, Base Exchange, Bldg 3000 and the Pharmacy on Wednesdays. Retirees are also being seen on Wednesdays at the CAC/DEERS office by appointment only.  Please call 661-277-4281 option 3, to make an appointment. Retirees may also utilize base facilities on Sundays.

AFMC commander: Agility, innovation to fuel future of AF logistics

AFMC commander speaks at AFA

Gen. Ellen M. Pawlikowski, commander of Air Force Materiel Command, speaks during the Air Force Association's 2017 Air Space, and Cyber Conference in National Harbor, Md., Sept. 18. The general's keynote speech was entitled 'Breaking the Logistics Barrier.' (U.S. Air Force photo/Staff Sgt. Chad Trujillo)

AFMC commander speaks at AFA

Gen. Ellen M. Pawlikowski, commander of Air Force Materiel Command, speaks during the Air Force Association's 2017 Air Space, and Cyber Conference in National Harbor, Md., Sept. 18. The general's keynote speech was entitled 'Breaking the Logistics Barrier.' (U.S. Air Force photo/Staff Sgt. Chad Trujillo)

NATIONAL HARBOR, Md. (AFNS) -- The future of Air Force logistics will find Airmen tapping into a secure digital network of archived additive manufacturing specifications, allowing for the 3D-printed creation of a weapons system component whenever and wherever needed.

This agile manufacturing approach is just one way Air Force Materiel Command is working to advance Air Force logistics, said Gen. Ellen M. Pawlikowski, AFMC commander, at the 2017 Air Force Association’s Air, Space and Cyber Conference Sept. 18, 2017.

“Imagine having a global manufacturing network for an aircraft like the F-35,” the general said. “Instead of storing parts, predicting what parts will fail and stockpiling them, if I have digital data for the key components and additive manufacturing capabilities in key locations…I can make the part and reduce the timelines and costs associated with its delivery.”

Pawlikowski said additive manufacturing has already borne “tremendous success.” She cited the example of a C-5’s load-bearing handle, a part that isn’t readily available, which normally costs $1,600 – once it can be acquired. In comparison, the Additive Manufacturing Innovation Center designed the part for 3D printing, and produced it for about $300 in less than three weeks. The Innovation Center is a partnership between AFMC's Air Force Life Cycle Management Center and the University of Dayton Research Institute.

The command, through its Air Force Sustainment Center, will also establish Innovation Centers near each of its three air logistics complexes located at Hill Air Force Base, Utah, Robins AFB, Georgia and Tinker AFB, Oklahoma. These centers will invite industry, academia and defense partners to collaborate with ALC personnel to develop new technology insertion techniques.

“We are looking at the application of robotics in order to perform functions on fifth-generation aircraft that we cannot easily perform through manual labor today,” Pawlikowski said. “And we’re looking at new techniques to apply lasers to handle certain materials.”

AFMC is also aggressively examining agile software development within ALCs and alongside industry partners. Agile software development seeks to quickly field and update software in a cyber-secure way. Pawlikowski said adopting this approach may eventually translate into the establishment of software squadrons or flights within the Air Force’s maintenance squadrons.

“We have to re-examine how we approach the sustainment of our weapons systems and how we support them in the context of a network of apps and apertures,” the general said. “That means the software can’t be developed off in a corner. It must be involved in the actual operation of the weapons system.”

To be an agile, responsive workforce at a speed threatening to adversaries, Pawlikowski said AFMC is also working on a logistics command and control initiative. This worldwide network would enable the visibility of the supply chain in a decentralized way, allowing for logistics support ahead of operators’ needs.

“You can very much see that the types of things that need to be done to support our fifth-generation aircraft require our Airmen out on the flight line to have the depth of understanding associated with maintaining the software and all the specifics that will keep them flying,” she said. “It will be critical to have a command and control system that points to the right place, the right part and the right expertise to move it as quickly as we can.”

USAF Comments Policy
If you wish to comment, use the text box below. AF reserves the right to modify this policy at any time.

This is a moderated forum. That means all comments will be reviewed before posting. In addition, we expect that participants will treat each other, as well as our agency and our employees, with respect. We will not post comments that contain abusive or vulgar language, spam, hate speech, personal attacks, violate EEO policy, are offensive to other or similar content. We will not post comments that are spam, are clearly "off topic", promote services or products, infringe copyright protected material, or contain any links that don't contribute to the discussion. Comments that make unsupported accusations will also not be posted. The AF and the AF alone will make a determination as to which comments will be posted. Any references to commercial entities, products, services, or other non-governmental organizations or individuals that remain on the site are provided solely for the information of individuals using this page. These references are not intended to reflect the opinion of the AF, DoD, the United States, or its officers or employees concerning the significance, priority, or importance to be given the referenced entity, product, service, or organization. Such references are not an official or personal endorsement of any product, person, or service, and may not be quoted or reproduced for the purpose of stating or implying AF endorsement or approval of any product, person, or service.

Any comments that report criminal activity including: suicidal behaviour or sexual assault will be reported to appropriate authorities including OSI. This forum is not:

  • This forum is not to be used to report criminal activity. If you have information for law enforcement, please contact OSI or your local police agency.
  • Do not submit unsolicited proposals, or other business ideas or inquiries to this forum. This site is not to be used for contracting or commercial business.
  • This forum may not be used for the submission of any claim, demand, informal or formal complaint, or any other form of legal and/or administrative notice or process, or for the exhaustion of any legal and/or administrative remedy.

AF does not guarantee or warrant that any information posted by individuals on this forum is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. AF may not be able to verify, does not warrant or guarantee, and assumes no liability for anything posted on this website by any other person. AF does not endorse, support or otherwise promote any private or commercial entity or the information, products or services contained on those websites that may be reached through links on our website.

Members of the media are asked to send questions to the public affairs through their normal channels and to refrain from submitting questions here as comments. Reporter questions will not be posted. We recognize that the Web is a 24/7 medium, and your comments are welcome at any time. However, given the need to manage federal resources, moderating and posting of comments will occur during regular business hours Monday through Friday. Comments submitted after hours or on weekends will be read and posted as early as possible; in most cases, this means the next business day.

For the benefit of robust discussion, we ask that comments remain "on-topic." This means that comments will be posted only as it relates to the topic that is being discussed within the blog post. The views expressed on the site by non-federal commentators do not necessarily reflect the official views of the AF or the Federal Government.

To protect your own privacy and the privacy of others, please do not include personally identifiable information, such as name, Social Security number, DoD ID number, OSI Case number, phone numbers or email addresses in the body of your comment. If you do voluntarily include personally identifiable information in your comment, such as your name, that comment may or may not be posted on the page. If your comment is posted, your name will not be redacted or removed. In no circumstances will comments be posted that contain Social Security numbers, DoD ID numbers, OSI case numbers, addresses, email address or phone numbers. The default for the posting of comments is "anonymous", but if you opt not to, any information, including your login name, may be displayed on our site.

Thank you for taking the time to read this comment policy. We encourage your participation in our discussion and look forward to an active exchange of ideas.